Series 50 max440kg
Designed for commercial and agricultural applications such as warehousing, agricultural buildings, stables etc.
Industrial Series 50 sliding system can be mounted both Face and Soffit fitting.
The comprehensive range of hangers and components allows Series 50 sliding door hardware to be used for many applications including overhead runway systems, partitions, sliding curtains and stabling blocks.
Series 50 straight sliding systems are suitable for timber or metal doors with maximum panel weight up to 440kg when using two 220kg 4 wheel hangers per door. Capacity will be reduced accordingly if using lower capacity hangers from the Series 50 range.
Series 50 straight sliding systems are suitable for timber or metal doors with maximum panel weight up to 440kg when using two 220kg 4 wheel hangers per door. Capacity will be reduced accordingly if using lower capacity hangers from the Series 50 range.
Series 50 straight sliding systems are suitable for timber or metal doors with amaximum panel weight up to 440kg.
Generally two hangers are used on each door panel. A third or fourth hanger can be used to increase door weight capacity. eg. using three 50-53 hangers would allow a door panel weighing up to 660kg to be used.
When using upper track support brackets they should be fixed at a minimum of 600mm and a maximum of 1000mm spacing. Series 50 steel or aluminium upper track is NOT pre-drilled and will require drilling for soffit fixing.
Please call our technical sales
team to discuss your requirements - 01280 822288
When using upper track support brackets they should be fixed at a minimum of 600mm and a maximum of 1000mm spacing. Series 50 steel or aluminium upper track is NOT pre-drilled and will require drilling for soffit fixing.
Please call our technical sales
team to discuss your requirements - 01280 822288
Using the Industrial 50 centre folding door system allows you to stack your doors to the centre of the partition not taking up excess space on either side.
The Industrial 50 sliding door system is capable of achieving many configurations of end-folding bi-fold applications.
